3.6 Relay Select
Step 1
Enter the Admin Code
0000
, the the display will show
Step 2
Enter the Magic Code (Password)
0000
, then press the screen will show
Step 3
Press then press
four times
, the display will show
Step 4
Press the screen will show
Step 5
Press Relay Select Code from the table below and then press then
Step 6
Press
to exit from the programming mode or continue programming.
3.7 Digital Input
The REX input can be used for exit switch, postal entry, etc. (see diagram). The REX input can be programmed
to trigger relay 1, relay 2 or both.
Step 1
Enter the Admin Code
0000
, the the display will show
Step 2
Enter the Magic Code (Password)
0000
, then press the screen will show
Password:_
ACS-BIO Setup
Set Parameter 1
Relay Select
5
0
Relay Select
5
_
MODE
CODE
No Relay
0
Relay 1 activated
1
Relay 2 activated
2
Both relay 1 and relay 2 activated
3
Password:_
ACS-BIO Setup
Set Parameter 1
Pach and Company
Page 13
07/28/04
AFGR9
Chapter 3. Set Parameters
