Step 5
Enter the 5-digit user ID to be edited then press
the screen will show
Step 6
Press to replace, the screen will show
and the finger print scanner turn red and ready to scan your finger print. The system will time out in
10 seconds if no finger print is detected and the screen will show
Step 7
Place your finger properly on top of the finger scanner, the display will show
Step 8
Enter the user name up to 15 characters using the keypad.
See table 4.1 for Keypad key correlation
table.
The screen will show
Step 9
Repeat Step 4 if you need to program another user’s finger print otherwise press to exit from
programming mode.
4.3 Secondary Finger Print Enrollment
The second finger print template is a backup template if the first finger print template cannot be recognized by
the system due to the minor cut or cover by a band aid. Note: If every user has the second finger print template
program in the system, the system’s memory will decrease by 50 percent.
Step 1
Enter the Admin Code
0000
, the the display will show
Step 2
Enter the Magic Code (Password)
0000
, then press the screen will show
Step 3
Press once and the screen will show
1. Replace
2. AddNew C. Abort_
Place Finger
Please Wait...
Enrollment
TIME OUT
Enter Name
_
Enter Name
SUCCESSFULLY
Password:_
ACS-BIO Setup
Set Parameter 1
ACS-Bio Setup
Enrollment 2
Pach and Company
Page 20
07/28/04
AFGR9
Chapter 4. Enrollment
