Table of Contents
file:///C|/PACH%20&%20COMPANY/PACH-CO.COM/PACH-CO.COM%202012/online_manual/q5voip_manual.htm[3/17/2016 12:29:03 PM]
11. Enter
0= no more additional time zone then press # and return to
to program another temporary code
1= add additional time zone then press # and return to
* = exit programming
Function Code 37 Initiate Premise Call
Call into the system from the premise (intercom mode). By default ## is used to call from the house phone to the system. If
the # key is used by the phone company, you can change to
**
1.
2. Enter 37 then #
3. Press 0= **, 1=
##
then press #
Function Code 38 System Acknowledge
The system will answer incoming outside call after the number of rings set. If the line associated with the system is
connected to fax machine, alarm panel or any answering device. Disable this function.
1.
2. Enter 38 then #
3. Press
0
= disable auto answer
1-9
= answer in 1-9 rings
then press #
Function Code 39 Disable and Enable Remote Access
If no remote opening allow, disable it using this function code. Default setting is enabled.
1.
