Table of Contents
file:///C|/PACH-CO.COM-2022-B/online_manual/qvoip_manual.htm[3/24/2022 1:59:26 PM]
Introduction
Pach & Company thanks and congratulates you on the purchase of your Quantum QVOIP Series Telephone Entry Access
Control Systems.
The manual is designed to guide you through the proper programming and use of the Quantum QVOIP Series It is
important for you to read and follow the manual completely.
The product comes with two years Limited Warranty, see above for more detail
System Descriptions
The Quantum QVOIP Series is multi tenant telephone entry system.
1. Requires Internet Access
2. C
apacity 600 tenants, 6000 Access Codes and 3000 Cards/Key-Fobs
Specifications
Input power
: 12VAC 40VA (12VAC supplied), 12VDC 3.0A
Minimal Current consumption
: 750-100mA
DIMENSION:
6-7/16 (H) x 10 (W) x 2-1/16 (D)
1x16 Liquid Crystal Display (LCD)
Built-in 26 Bit Wiegand Card Reader
RS-485 for Satellite system (up to eight satellite)
Two on-board relays
Two Auxiliary inputs
Operating environment 10ºF-140ºF
Relative Humidity 0%-95% non-condensing
Double 3/4" knock-out on the back and bottom panel
Features
Event recording (600 Event Buffers)
Automatic Enrollment
Automatic call forwarding, intercom mode on existing active phone line
20 programmable time zones, 10 programmable auto-unlock schedules and 20 holiday schedules
10 programmable temporary cards and access codes for limited use
10 programmable unlock hold cards and access codes
Program blocks of cards and blocks of codes
CHAPTER 2
Installation and Wiring Diagram
Follow the wiring diagram carefully. Improper installation will void the warranty.
Please call technical support in case you
