Page 2
Rev 508jf
WARRANTY
Pacific Aeromodel Mfg., Inc. guarantees this kit to be free from defects in material and
workmanship at the time of purchase and for 30 days thereafter. This warranty does not cover any
component parts damaged by use, modification or the installation of an engine larger than those
specified. In no event shall Pacific Aeromodel Mfg., Inc.’s liability exceed the original purchase
price of this kit. Pacific Aeromodel Mfg., Inc. reserves the right to change or modify this warranty
without notice.
Since Pacific Aeromodel Mfg., Inc. has no control over the final assembly of this kit, the materials
and accessories used in the final assembly, or the manner in which the assembled model is used, no
liability is assumed or accepted for any damage resulting from the use of the assembled model
aircraft. By the acts of assembling and using the assembled aircraft, the user accepts all resulting
liability.
Pacific Aeromodel Mfg., Inc recommends that you join the Academy of Model Aeronautics (AMA),
which provides its members with liability insurance covering the use of model aircraft. You can
reach them at 5161 East Memorial Drive, Muncie, Indiana 47302, phone # 765-287-1256, or email
www.modelaircraft.org.
ALWAYS OPERATE THIS MODEL AIRCRAFT IN ACCORDANCE WITH THE
AMA SAFETY CODE.
(A copy is included at the back of this manual.)
PARTS LIST
Inspect the components of this kit now.
If you find any parts damaged or missing, call or email us
right away. We cannot accept the return of parts on which assembly work has already begun.
Fuselage with sliding engine box and
windshield installed
Right wing with aileron and (5) giant scale
hinges
Left wing with aileron and (5) giant scale
hinges
Vertical fin and rudder with (4) hinges
Horizontal stabilizer with (2) elevators and
(8) hinges
Aluminum wing tubes (3)
Plastic throttle and choke pushrod
assemblies
Cowl with mounting blocks and dummy
engine
Trim sticker pack
Wing struts, front (2), rear (2)
3/4”x 3/8”x 5 3/4” balsa tank retainer stick
Plywood pushrod standoffs (4)
Main landing gear assembly (2)
Wheel pants, fixed (2), sliding (2)
Main wheels (2)
Fuel Tank (gasoline only)
Tail wheel assembly
4-40 x 3” pushrod assembly (2)
4-40 x 4” pushrod assembly (2)
Pull-pull cable assemblies (2)
Metal control horns (6)
1/4-20 x 2” nylon wing bolts (2)
