- 28 -
Adjusting the Induction Distance
1.
Press the [STOP] button for 10 seconds or until the screen on the remote flashes.
Then press the [- SEAT TEMP +] button to adjust the induction distance, and the
distance level will be displayed on the LED of the main unit.
2.
Press the [FRONT] button to increase the induction distance, and the
corresponding number on the LED screen will decrease one by one.
3.
Press the [SPRAY] button to decrease the induction distance, and the
corresponding number on the LED screen will increase one by one.
Toilet Cover
Indicator Light
Automatic
Deodorizing
Indicator Light
Seat Temperature
Indicator Light
Induction Distance
Level
□
□
□
0
□
□
■
1
□
■
□
2
□
■
■
3
■
□
□
4
■
□
■
5
■
■
□
6
4.
After setting the distance you want, press the [FLUSH] button to save the settings.
Friendly Tips:
•
The ‘0’ level represents the longest induction distance. It shortens 10cm every time the number
increases 1 level
•
The setup mode ends automatically if it goes more than 20 seconds without receiving any signal
Freeze Prevention
•
When the freeze prevention function is activated, 50ml of warm water discharges
from the nozzle every 5 minutes.
•
To enable this feature:
1
Press the [STOP] button for 10 seconds or until the screen of the remote
flashes
2
Press ‘-’ on the [- DRYER TEMP +] button until you hear the remote beep
3
Press the [STOP] button again
•
The above-mentioned steps can be used to cancel these changes as well
Summary of Contents for CASCADIA PB-TS03
Page 10: ...7 PARTS AND FEATURES...
Page 11: ...8 CONTROL PANEL OPERATION...