background image

    

•  Use of a battery or charger other than the supplied Kid 

Trax Toys 6V rechargeable battery and charger may cause 

a fire or explosion. Only use the supplied Kid Trax Toys 6V 

rechargeable battery and charger with the vehicle.

•  Using the Kid Trax Toys 6V rechargeable battery and 

charger for any other product may result in overheating, fire 

or explosion. Never use the Kid Trax Toys 6V rechargeable 

battery and charger with another product.

•  Explosive gases are created during charging. Charge the 

battery in a well ventilated area. Do not charge the battery 

near heat or flammable materials.

•  Contact between the positive and negative terminals may 

result in fire or explosion. Avoid direct contact between the 

terminals. Picking up the battery by the wires or charger can 

cause damage to the battery and may result in a fire. Always 

pick up the battery by it’s case or handles.

•  Liquids on the battery may cause fire or electric shock. 

Always keep all liquids away from the battery and keep the 

battery dry.

•  Contact or exposure to battery leakage (lead acid) may cause 

serious injury. If contact or exposure occurs immediately call 

your physician. If the chemical is on the skin or in the eyes, 

flush with cool water for 15 minutes. If the chemical was 

swallowed, immediately give the person water or milk. Do not 

give water or milk if the patient is vomiting or has a decreased 

level of alertness. Do not induce vomiting.

The following safety hazards may result in serious injury or death to the 

user of the Scooter:

•  Battery posts, terminals and related accessories contain lead 

and lead compounds (acid), chemicals known to the State of 

California to cause cancer, reproductive harm and are toxic 

and corrosive. Never open the battery.

•  Tampering or modifying the electric circuit system may cause 

a shock, fire or explosion and permanently damage the 

system. Exposed wiring, circuitry in the charger may cause 

electric shock. Always keep the charger housing closed.

11

The following safety hazards may result in serious injury or death to the 

user of the Scooter:

WARNING!

Summary of Contents for KT1165



























Reviews: