background image

    

WARNING!

The following safety hazards may result in serious injury or death to the 

user of the scooter:
•  This product contains small parts that are for adult assembly only. 

Keep small children away when assembling. Remove and dispose 

of all protective material and poly bags before assembly. Be sure to 

remove all packaging materials and parts from underneath the car 

body.

•  Riding the vehicle without a helmet. Riders must always wear a fitted 

helmet that complies with U.S. Consumer Product Safety 

Commission (CPSC) Standard CFR 1183.

•  Battery posts, terminals and related accessories contain lead and 

lead compounds (acids) chemicals known to the state of California to 

cause cancer, reproductive harm, and are toxic and corrosive. Never 

open the battery.

•  Body parts such as hands, legs, hair and clothing can get caught in 

moving parts. Never place a body part near a moving part or wear 

loose clothing while using the vehicle. Always wear shoes when 

using the vehicle.

•  Using the vehicle near streets, motor vehicles, drop-offs such as: 

steps, water (swimming pools) or other bodies of water, sloped 

surfaces, hills, wet areas, flammable vapors, in alleys, at night or in 

the dark could result in an unexpected accident. Always use the 

vehicle in a safe, secure environment with continuous adult 

supervision.

•  Using the vehicle in unsafe conditions such as snow, rain, loose dirt, 

mud, sand or fine gravel may result in unexpected action such as tip 

over and skidding.

•  Using the vehicle in an unsafe manner. Examples include but are not 

limited to:

     a. Pulling the vehicle with another vehicle or similar device
     b. Allowing more than one rider
     c. Pushing the user from the back
     d. Traveling at an unsafe speed

Always use common sense and safe practices when using the vehicle.
This product contains or emits chemicals known to the state of 

California to cause cancer or birth defects or other reproductive harm.

1

Safety

Summary of Contents for KT1165



























Reviews: