8
IMPORTANT! The vehicle MUST come to a complete stop before shifting into
reverse and into low or high speed. Damage to the gears and motor WILL occur.
Reverse
High Speed (5 MPH) for Advanced Drivers
ONLY experienced drivers may use "High" speed (7.5km/h). The shifter will not go
into "High" speed until it is unlocked. ONLY AN ADULT MAY operate the locking switch.
General Operation
1. Turn on the power switch.
2. Adjust shifter in a forward position or reverse.
3. Press down on the foot pedal, and the car will go forward at 3.2 or 7.5 km/h / 2 MPH or 5 MPH
(depending on position of High/Low speed switch).
4. Release the foot pedal, and the car will stop.
5. Turn off power switch when not playing.
NOTE: Always shut off power before climbing in or out.
1. Release the foot pedal to stop the vehicle.
2. Pull the shifter all the way back into reverse.
3. Press down on the foot pedal, and the car will go in reverse at 3.2Km/h or 2 MPH.
4. Release the foot pedal, and the car will stop. NOTE: When the foot pedal is
released, the car will coast slightly before coming to a complete stop.
1. Shift the locking switch to right side by screw driver that can release the
speed limit control function. At that time,vehicle can go with Low and High
speed which base on the "Low/High switch" position.
2. Push the shifter forward. NOTE: The car MUST come to a complete stop
before shifting into reverse and back into low or high speed. Damage to the
gears and motor could occur.
3. Press down on the foot pedal, and the car will go forward at 7.5km/h.
4. Release the foot pedal, and the car will stop.
NOTE: When the foot pedal is released, the vehicle will coast slightly
before coming to a complete stop.
