background image

22

ALT5.CPINSB  080515-24

©PACIFIC ENERGY FIREPLACE 
PRODUCTS LTD.

Pacifi c Energy Limited Lifetime Warranty

Wood Products

Pacifi c Energy extends the following warranty coverage to the original registered purchaser of the product:

LTD Lifetime Coverage (10 years)

Limited lifetime coverage is extended to the following components (parts only) porcelain fi nish, glass (glass for thermal 
breakage only, not impact), plating, fi rebox and baffle.

3 Year  Comprehensive

Pacifi c Energy will replace or repair any part found to be defective (parts and labor) for three years from the date of pur-
chase.

This coverage includes electrical components (blowers, speed controls and thermal switches).

Conditions:

Your stove has been designed to perform in the harshest climates in North America. You can be confi dent that 
under normal use your stove will be trouble free for many years.  If your stove is prematurely deteriorating this is 
a signifi cant indicator of improper usage, for example; excessive draft, heating to large an area, contaminated fuel 
- such as high sodium content or plastics and chemicals. Please be aware, these conditions may be reasons to 
void your warranty.

For wood products 

- All installations must be installed according to all applicable local and national codes. It is the re-

sponsibility of the installer to ensure the unit is operating correctly at installation.

Any part that shows in our judgment evidence of defect shall be repaired, replaced or refunded at Pacifi c Energy’s option. 
The defective part may be required to be returned to Pacifi c Energy or an accredited agent, transportation prepaid.

Porcelain

 is warranted for gloss retention. Certain colors may darken when heated and return to the original shade when 

cool.

Glass

 is warranted against thermal breakage.

Plating

 is warranted against tarnishing. Gold plating may attain a deeper color with use.

Exclusions

Limited Lifetime coverage - Lifetime coverage is limited to the repair, replacement or refund of the indicated parts only. 
Labor charges are not covered under the lifetime warranty.

The following items are not included in the Lifetime Warranty: fi rebox rails and heat shields.

The following parts are not warranted: fi rebrick, gaskets and ceramic fi ber blankets.

This warranty does not apply to any part that shows evidence of misuse, abuse, improper installation, accident, lack of 
maintenance, or modifi cation.

Pacifi c Energy shall in no event be liable for any special, indirect or consequential damages of any nature whatsoever 
which are in excess of the original purchase price of the product.

Pacifi c Energy is not responsible for installation, operational or environmental conditions beyond our control.
(The company may, at its discretion, discharge all obligations by refunding the wholesale price of the defective part.)

For Warranty claims, please contact your nearest Pacifi c Energy dealer.

Warranty Information

Summary of Contents for Alderlea T5 Classic Insert

























Reviews: