23
ALT5 LE Insert 230819-32
100003038
Loosen ash lip bolts
Figure 23: Ash lip bolts.
Remove screws and clips
Figure 24: Remove speed control screws and clips.
Remove screws
Figure 25: Speed control assy removal.
4. Loosen the two bolts that secure the ash lip to the firebox (Figure 23), carefully lift up the ash lip and
remove from the firebox.
5. Loosen the screws on the wire support tabs and turn to remove the wires (Figure 24).
6. Remove the two screws securing the speed controls assembly to the ash lip (Figure 25). Remove cover
plate on opposite side.
7. Remove the control assembly from the ashlip bracket on the right hand side. Flip it over and reattach on
the left hand side of the ashlip (Figure 26). Use the upper screw holes for best alignment.
8. Route cable from speed control to fan and reattach wire support tabs on the underside of the ash lip. Note
wire positions (Figure 27 and Figure 28).
Speed
control assy
Ash lip
bracket
Figure 26: Relocating speed control assy and bracket.
Reconnect wire clips
Figure 27: Reconnect wire support clips.
Figure 28: Note wire position.