3. Place four bricks along the left hand wall. Insert the bricks and slide them forward, so that they are kept in
place behind the rail tabs (Figure 38).
4. Place three bricks against the rear wall. Position the bricks behind the tabs and slide them in towards the
center of the stove to eliminate any gaps that may appear.
5. Place four bricks in behind the right side wall tabs (Figure 40). Again, move the bricks toward the front.
Note: Even though the far bricks on both side walls will fit completely behind the rear wall end bricks, do
not do this as the resulting gaps in the side wall bricks at the front will be too large.
Figure 37: Floor bricks in place.
Figure 38: Left wall bricks in place.
Figure 39: Rear wall bricks in place.
Figure 40: Right wall bricks in place.
28
ALT5 LE Insert 230819-32
100003038
Figure 35: Empty firebox.
Figure 36: Cover in place.