3
Important:
When lit for the first time, the appliance
will emit a slight odour for a couple of hours. This is
due to the curing of paints, sealants and lubricants
used in the manufacturing process. This condition is
temporary. Open doors and windows to ventilate
area. If optional fan kit has been installed, place fan
in the "OFF" position. Smoke and fumes caused by
the curing process may cause discomfort to some
individuals.
It is normal for fireplaces fabricated of steel to give off
some expansion and/or contraction noises during the
start up or cool down cycle. Similar noises are found
with your furnace heat exchanger or cook stove oven.
Super 27 Gas
Classic Gas
Leg Model
Pedestal Model
Fig # 1
CAUTION
FOR YOUR SAFETY -
Do not install or operate your Pacific
Energy heater without first reading and understanding this
manual. Any installation or operational deviation from the
following instructions voids the Pacific Energy Warranty and
may prove hazardous.
This appliance and its individual shutoff valve must be
disconnected from gas supply piping system during any
pressure testing of that system at test pressures in excess of
1/2 psig. (3.5 kPa).
This appliance must be isolated from the gas supply piping
system by closing its individual manual shutoff valve during
any pressure testing of the gas supply piping system at test
pressures equal to or less than 1/2 psig. (3.5 kPa).
