30
INSTALLER
INFORMATION
5056.412-E
Rustic Log Set Installation / Removal
Figure 50: Log Set
Figure 51: Rear Log Installation
Figure 53: Side Log Installation
Figure 55: Complete Log Set
Figure 54: Decorative Log Installation
Figure 52: Front Log Installation
Installation
1. Position rear logs #1 and #2 against the back
firebox as seen in Figure 51.
2. Position front logs #3 and #4 between the
front burner tubes as seen in Figure 52.
3. Position side logs #5; #6 as seen in Figure 53.
4. Position logs #7 and #8 as seen in Figure 54.
5. Place logs # 9; 10 and 11 and ember chunks
in front of burner to hide the burner as seen in
Figure 55.
Note: Do Not Block Burner Ports with
Embers
Removal
1. Remove embers from fireplace.
2. Lift the side and decorative log off of the front
log and remove it from the firebox.
3. Lift the front logs off of the burner and remove
it from the firebox.
4. Lift the rear logs over the pilot and burner and
remove from firebox.
