20
5055.MR30-A
180516-36
Continuous Pilot/Intermittent Pilot (CPI/IPI)
selection
With the system in the “OFF” position, press the
Mode Key (Figure 14) to index to the CPI mode icon
(Figure 25). Pressing the Up Arrow Key will activate the
Continuous Pilot Ignition mode (CPI). Pressing the Down
Arrow Key will return to IPI. A single “beep” will confi rm
the reception of the command.
Low Battery Power Detection
Transmitter
The life span of the remote control batteries depends on various factors: quality of the
batteries used, the number of ignitions of the Stove, the number of changes to the room
thermostat set point, etc.
When the remote control transmitters’ batteries are low, an icon will appear on the LCD
display (Figure 27) of the remote before all battery power is lost. When the batteries are
replaced this icon will disappear.
Receiver
The life span of the IFC module batteries depends on various factors: quality of the bat-
teries used, the number of ignitions of the Stove, the number of changes to the room
thermostat set point, etc.
When the IFC batteries are low, a “double-beep” will be emitted from the IFC module
when it receives a command from the remote. This is an alert for a low battery condi-
tion for the IFC module. When the batteries are replaced, a single “beep” will be emit-
ted from the IFC module when a key is pressed - See (“Initializing the Fireplace for the
fi rst time” on page 17).
Key Lock
This function will lock the keys to avoid unsupervised operation. To activate this function,
press the MODE and UP keys at the same time (Figure 14).The lock icon will appear
(Figure 26). To deactivate this function, press the MODE and UP key at the same time.
Figure 25: IPI - CPI control.
Figure 26: Key lock.
Figure 27: Low battery.
Summary of Contents for MIRAGE 30 SERIES A
Page 33: ...33 180516 36 5055 MR30 A ...
Page 34: ...34 5055 MR30 A 180516 36 ...
Page 35: ...35 180516 36 5055 MR30 A ...
