25
180516-36
5055.MR30-A
Burner Kit Installation/Removal
Installation
Interior panels must be installed before burner tray can be
installed. The orifi ce must be removed prior to burner tray
insertion (Figure 41). Remove 2 - 3/8” nuts and extract the
orifi ce from the fi rebox.
Insert the burner tray (Figure 39) and insert 4 Robertson
screws to fi x it in place. Reinstall the orifi ce and two 3/8” nuts.
E
venly spread a thin layer of crushed glass across the entire
burner pan (Figure 42).
Removal
Begin by removing the exterior side panel on your right hand
side as you face the Mirage 30 (Figure 51 on page 27).
Remove the orifi ce from the side wall of the Mirage 30
(Figure 41).
Remove the glass media (Figure 42), then remove the 4
screws (Figure 40)
with a screwdriver, and remove the
burner tray (Figure 39).
Screws
Nuts
Orifi ce
Burner Tray Installation / Removal
Figure 39: Burner basket.
Figure 40: Unfastening the burner tray.
Figure 41: Orifi ce extraction.
Figure 42: Glass media in burner tray.
Summary of Contents for MIRAGE 30 SERIES A
Page 33: ...33 180516 36 5055 MR30 A ...
Page 34: ...34 5055 MR30 A 180516 36 ...
Page 35: ...35 180516 36 5055 MR30 A ...