18
SUMMIT-B 091013-20
ITEM
SIZE
PART
NUMBER
A
1 1/2” X 4 1/2” X 1 1/4”
(39 mm x 115 mm x 32 mm)
248.001
B
4” X 4 1/2” X 1 1/4”
(102 mm x 115 mm x 32 mm)
246.001
C
7 1/4” X 4 1/2” X 1 1/4”
(184 mm x 115 mm x 32 mm)
245.001
D
9” X 4 1/2” X 1 1/4”
(230 mm x 115 mm x 32 mm)
5096.99
E
9” X 4 1/2”
(cut)
X 1 1/4”
(230 mm x 115 mm
(cut)
x 32 mm)
3245.011
F
9” X 3 1/2” X 1 1/4”
(102 mm x 115 mm x 32 mm)
3245.501
Pacifi c Summit and Summit Classic
Wood Stove
Firebrick Installation Instructions
This package contains 17 full-size fi rebricks, as well as 7 various cut-size bricks.
If your heater came with an ash cleanout system, or an optional one is being in-
stalled, one brick (D) will not be needed for your installation.
With the woodstove in the upright position, install fi rebricks as follows:
1) Place the fi rebricks on the bottom of the unit fi rst. Use a total of 6 full-size (D)
and 5 cut bricks (A, B, C & 2E) with ash cleanout system or 7 full-size (D) and 3
cut bricks (C & 2E) if the ash cleanout system is not used.
2) Next install the side fi rebricks, 2 full-size and 2 cut fi rebricks(F) on each side of
the fi rebox as shown.
3) Finally install 4 full-size bricks against the rear wall as shown.
Without Ash Cleanout System Installed
With Ash Cleanout System Installed
F
C
E
D
D
B
F
E
C
A
D
F