220206-20
SUPER-SD1
5
Super 27 - Pedestal Model
Spectrum
Super 27 - Leg Model
Spectrum Classic
Pedestal Kit
1) With the unit on its back and the removable cover facing up,
align the pedestal mounting holes with the holes on the
stove.
2) Secure in place with 1" x 1/2" bolts previously removed.
3) Carefully place the unit in the upright position.
-OR-
Leg Kit
1) With the unit on its back, align the ash drawer enclosure
mounting holes (removable cover facing up) with the holes
on the stove.
2) Position the legs over top of the same holes on the stove.
2) Secure in place with 1" x 1/2" bolts previously removed.
3) Carefully place the unit in the upright position.
- Super 27 only -
Assembly
Crate Removal
1) Carefully remove wood top and supports.
2) Remove plastic cover.
3) Using a 7/16" wrench, remove lag bolts that secure stove
body to bottom pallet.
4) Place stove body carefully on its back.
5) Using two 3/4" wrench, remove 1" x 1/2" bolts and save for
later use.
6) Remove pallet retaining brackets from stove bottom.
Optional Ash Cleanout System
-(Install first)
1) With stove body laying on its back, remove the 1/4" x 1" Tek
screw located at the top left of the stove bottom.
2) Remove the ash system hole cover and gasket located under
the stove. Discard cover plate and gasket.
3) Place new gasket provided over existing studs.
4) Install ash dump system over gasket and secure with two 1/
2" nuts previously removed.
5) Install the 1/4" Tek screw in the original hole and secure.
