Pacific energy SUPER 27 SPECTRUM, Installation And Operating Instructions Manual

071111-20 

SUPER-SD1 17

Super 27 and Pacifi c 

NOTE: Optional ash dump kit should be installed prior to pedestal or leg kit 
 assembly.

Required: Pedestal 

Kit 

Leg 

Adapter

1 

Pedestal base 

1 

Ash drawer enclosure

1 

Front cover (attached) 

1 

Front cover (attached)

4 

1/2" 

washers

with

Leg 

Set

4 

Legs

Crate Removal

1) 

Carefully remove wood top and supports.

2)   Remove plastic cover.

3) 

Using a 7/16" wrench, remove lag bolts that secure stove body to bottom 
pallet.

4) 

Place stove body carefully on its back.

5) 

Using a 3/4" wrench, remove 1" x 1/2" bolts and save for later use.

6) 

Remove pallet retaining brackets from stove bottom.

Pedestal Kit

1) 

With the unit on its back and the removable cover facing up, align the pedestal 
mounting holes with the holes on the stove.

2) 

Secure in place with 1" x 1/2" bolts previously removed.

3) 

Carefully place the unit in the upright position.

Leg Adapter and Leg Kit

1) 

With the unit on its back, align the ash drawer enclosure mounting holes 
(removable cover facing up) with the holes on the stove.

2) 

Position the legs over top of the same holes on the stove.

3) 

Secure in place with 1" x 1/2" bolts previously removed.

Pedestal or Legs 

Installation Instructions