201213-20
7
36" (914 mm)
Minimum
Radiation shield
Chimney support
Chimney connector
Non-combustible fl oor
protector
* 4" diameter air inlet with rodent
screen
* If crawl space is well ven-
tilated it is not necessary to
extend air inlet to outside
Chimney
Roof fl ashing
Storm collar
Hooded vent
Attachment to fl oor for
mobile homes
Spark arrestor
rain cap
FIG. #2
7' (2.1 m.)
Minimum
Ceiling Height
58" (1473 mm)
Minimum
48"
(1219 mm)
Minimum
The chimney may incorporate
an offset. To do this safely, all
sections of listed connector, offset
elbows and chimney section
must be screwed together by at
least three sheet metal screws
per joint. The chimney must
be suitably supported by the
chimney manufacturer's listed
offset support.