- 3 -
UNPACKING THE MACHINE
TRANSPORTING THE MACHINE
Two (2) tie-down points have been provided to allow the
machine to be secured during transportation.
Ensure the machine is properly secured with suitable tie-down
straps before transporting the machine.
1. Remove outer cardboard packaging.
2. Remove the shrink wrap securing the ramp and allow the ramp (not shown) to lower to the ground.
3. Using a #2 Philips driver, remove the screws from the front and rear wood wheel chocks.
4. Using a 3/8” socket and driver or wrench, remove the screws from the tie-down straps located at each corner of the machine.
5. Raise the scrub head to the transport position.
6. Carefully maneuver the machine down the ramp.
7. Install the rear squeegee assembly.
CAUTION
: Remove the batteries and use mechanical assistance to lift machine manually.
NOTE
: Fully drain the Solution and Recovery tanks before loading.
NOTE
: Ensure the ramp and truck/trailer are properly rated for the weight of the machine.
NOTE
: Use a ramp with no more than a 12% incline to load and unload the machine.
NOTE
: Transport the machine with the scrub head in the lowered position.
NOTE
: Do not lower the Orbital Scrub Head without a pad installed. Doing so will damage the Mighty-Lok
®
face.
NOTE
: Remove the rear squeegee assembly before transporting the machine.
Tie down holes on both sides of
the main frame
Run tie down straps between the
Recovery and Solution tanks
Summary of Contents for S-20
