21
CLEAN AND INSPECT:
1.
Inspect both squeegee blades. If the blade edges are not clearly defined
or are worn halfway through the thickness of the blade, flip the blades to
another edge or replace as required.
2.
Thoroughly clean and rinse the underside of the squeegee frame, blades
and neck.
REMOVE AND INSTALL THE SQUEEGEE BLADES:
1.
Release the latch and slide the retainer off the hook on the other side.
2.
Blades can be flipped length wise or top to bottom to utilize another blade edge.
3.
Blade installation is the reverse of the removal.
PICKING UP LARGER DEBRIS
Hang a plastic bag from the hooks on the left side
of the recovery tank for collecting large pieces of
debris.
Summary of Contents for S-28
Page 56: ...BATTERYSHIELD OPTIONAL WIRING DIAGRAM 56 RETURN TO TABLE OF CONTENTS...
Page 57: ...CHEMICAL INJECTION OPTIONAL WIRING DIAGRAM 57 RETURN TO TABLE OF CONTENTS...
Page 58: ...58 MAINTENANCE LOG DATE MAINTENANCE PERFORMED RETURN TO TABLE OF CONTENTS...
Page 60: ...60 http www pacificfloorcare com RETURN TO TABLE OF CONTENTS...
