LMX SERIES™ OPERATION MANUAL
SECTION 8:
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Page 286 of 463
Query Syntax
[SOURce:]STEP:COUNT:MINimum?
Description
This command returns lowest permissible set value for the STEP
count setting.
Returned Data Format
<nr1>
Query Example
STEP:COUNT:MIN?
1
Query Syntax
[SOURce:]STEP:COUNT:MAXimum?
Description
This command returns highest permissible set value for the STEP
count setting.
Returned Data Format
<nr1>
Query Example
STEP:COUNT:MAX?
200
Query Syntax
[SOURce:]STEP:COUNT:DEFault?
Description
This command returns default set value for the STEP count setting.
Returned Data Format
<nr2>
Query Example
STEP:COUNT:DEF?
10
Command Syntax
[SOURce:]STEP:HOLD < 0 | OFF 1 | ON >
Description
This command determines what happens to the source output after
the step transient finishes. If ON, the last step value will be set as the
steady state output when the step execution ends. If OFF, the output
will revert to the original steady state setting in effect before the step
transient execution.
Parameters
< 0 | OFF | 1 | ON >
Parameter Format
<cr>
Example
STEP:HOLD ON
Query Format
[SOURce:]STEP:HOLD?
Returned Data Format
<b>
Query Example
STEP:HOLD?
1
