LMX SERIES™ OPERATION MANUAL
SECTION 8:
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Page 350 of 463
8.10.2
SOURce:SYNChronize Commands
SOURce:SYNChronize
[:INput][?]
:PHASEshift[?}
:RANGE[?}
:SOURCE[?}
:SPeed[?}
:STATe?
SOURce:SYNChronize
:OUTPut[?]
8.10.2.1
SOURce:SYNChronize[:INput]
Command Syntax
SOURce:SYNChronize[:INput]
Description
This command enables or disables the external sync input mode.
Parameters
[ 0 | OFF | 1 | ON ]
Parameter Format
<b>
Example
SOUR:SYNC 1
Query Format
SOURce:SYNChronize[:INput]?
Returned Data Format
<b>
Query Example
SOUR:SYNC?
1
Command Syntax
SOURce:SYNChronize[:Input]:PHASEshift <nr2>
Description
Defines a fixed phase shift between phase A waveform generation
and the external sync source. Used to calibrate any phase difference
between the sync signal and the power source output on phase A.
Parameters
Phase shift
Parameter Format
<nr>
Example
SOUR:SYNC:PHASE 2.8
Query Format
SOURce:SYNChronize[:Input]:PHASEshift?
Returned Data Format
<nr2>
Query Example
SOUR:SYNC:PHASE?
0.5
