7
SECTION 2
SPECIFICATIONS
2 SPECIFICATIONS
This section states the electrical specifications of the ASX-Series Power Source. The
specifications listed apply to all models, except as noted. Some specifications are controller
dependent. These are noted as such.
2.1 ELECTRICAL
SPECIFICATIONS
2.1.1 INPUT POWER REQUIREMENTS
This paragraph lists and defines the input voltage forms that are accepted by the various models
within the ASX-Series line of equipment. Each model is listed separately. Refer to the
appropriate model when determining proper input service requirements. The input currents
listed are those for operation at full rated load. Overload conditions will result in higher input
currents that still fall within the recommended input service.
The input power transformer of the ASX-Series Power Source has taps for each of the listed
power forms--one of which is selected by the factory at time of order. Once selected, the unit will
operate at designated voltage, ±10%.
The standard input frequency of 50/60 Hz is offered for all models. 400 Hz ( 360 – 440 Hz) option
is also available. Please call factory for details.
MODEL 115-ASX
INPUT VOLTAGE
The Model 115-ASX accepts one of the following single phase input voltages:
1)
100 VAC ±10%, 47-63 Hz
2)
110 VAC ±10%, 47-63 Hz
3)
120 VAC ±10%, 47-63 Hz
4)
200 VAC ±10%, 47-63 Hz
5)
208 VAC ±10%, 47-63 Hz
6)
220 VAC ±10%, 47-63 Hz
7)
230 VAC ±10%, 47-63 Hz
8)
240 VAC ±10%, 47-63 Hz
INPUT CURRENT
The input current required by the Model 115-ASX at full rated load is stated below.
Recommended input service is also stated.
V
in
INPUT CURRENT
SERVICE RECOMMENDED
1)
100 VAC
22 A
rms
25
A
2)
110 VAC
20 A
rms
25
A
3)
120 VAC
18 A
rms
25
A
4)
200 VAC
11 A
rms
15
A
5)
208 VAC
10 A
rms
15
A
6)
220 VAC
10 A
rms
15
A
7)
230 VAC
9 A
rms
15
A
8)
240 VAC
9 A
rms
15
A
