SECTION 4
OPERATION
Pacific Power Source ©2013
4-17
Document # 126050-10 Rev E
4.4
OPERATING PROCEDURES
This paragraph describes Power Source modes of operation and the various
operating procedures to be used in operating the MS-Series Power Source.
CAUTION
-
BEFORE APPLYING POWER OF ANY KIND TO THE POWER SOURCE, READ
SECTION 4.0 OF THIS MANUAL ENTIRELY AND DO NOT PROCEED UNTIL ITS
CONTENTS ARE FULLY UNDERSTOOD.
This section is divided into four sub-paragraphs:
1. Power Source Modes of Operation
Provides definition of Power Source operational states.
2. First Time Turn-On Procedure
To be performed at initial turn-on or when service has been performed.
3. Normal Shut-Down Procedure
To be performed when Power Source power is secured for load maintenance.
4. Emergency Shutdown Procedure
Action taken to secure Power Source output power in emergency situations.
Operation of the MS-Series Power Source has been designed to be simple and
straightforward. This is done for several reasons the primary reason being safety.
The addition of an Emergency Off Switch allows for quick action in the case of an
emergency.
It cannot be stressed too many times that Solid-State Power Sources are
capable of delivering tremendous amounts of energy.
Things happen quickly
when something goes wrong. However, good habits and a methodical approach,
when operating this equipment will, avoid most hazards.
!