IMPORTANT SAFETY INSTRUCTIONS
To assure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you do
not understand, ask your supervisor.
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE!
WARNING! To reduce the risk of fire, electric shock, or injury:
1.
You must be trained to operate this machine. This machine is to be operated for its intended use only.
2.
Do not operate this machine unless it is completely assembled.
3.
Do not connect this machine to improper voltage. Always use a 3-wire grounded electrical supply. See the Grounding
Instructions below.
4.
To prevent electrical shock, always disconnect the electrical plug of the machine from the electrical outlet before performing
an repairs, maintenence or cleanup and when leaving the machine unattended.
5.
Keep the machine surface dry. Do not subject to rain. Store the machine in a dry building area. Clean the machine with a dry
cloth only.
6.
Machines can cause an explosion when near flammable materials and vapors. Do not use or store this machine with or near
fuels, grain dust, solvents, thinners, or other flammable materials. Do not use flammables to clean this machine.
7.
Maintenance and repairs on this machine must be done by a qualified or authorized person.
8.
If the machine is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a
service center.
9.
Avoid damage to the machine’s electrical cord. Always lift the machine over the cord. Do not run the machine over the cord.
10. Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine.
This machine must be grounded. If it should malfunction or break
down, grounding provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This machine is equipped
with a cord having an equipment-grounding conductor and grounding
plug. The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and
ordinances.
WARNING
- Improper connection of the equipment-grounding con-
ductor can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug provided with
the machine - if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
This machine is for use on a nominal 120-volt circuit, and has a
grounded plug that looks like the plug illustrated in figure A. A
temporary adapter that looks like the adapter illustrated in figures B
and C may be used to connect this plug to a 2-pole receptacle as
shown in figure B if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded
outlet (figure A) can be installed by a qualified electrician. The green
colored rigid ear, lug, or the like extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet
box cover. Whenever the adapter is used, it must be held in place by
a metal screw.
NOTE: In Canada, the use of a temporary adapter is not permitted by
the Canadian Electrical Code
EXTENSION CORDS
Use only three-wire 16/3 or larger gauge approved extension cords
that have three-prong grounding type plugs and three-pole recep-
tacles that accept the appliance’s plug. Replace or repair any dam-
aged cords or plugs.
When servicing, refer to authorized person only. Use only identical
replacement parts.
Grounding Instructions
NOTE:
Do not use adapters shown in figures B & C in Canada
2
