background image

WARRANTY POLICY

PACIFIC LIMITED WARRANTY

The Pacific FloorMaster 18B has been manufactured, tested and inspected in accordance with specific engineering requirements.  This
machine is WARRANTED to be free from defects in workmanship and materials for periods as follows from the date of purchase.

Ten (10) Years Parts, One (1) Year Labor – Polyethylene Components

Five (5) Years Parts, One (1) Year Labor – Main Frame

Two (2) Years Parts, One (1) Year Labor – Brush Drive Motor

One (1) Year Parts & Labor – All other components unless excluded below

This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with Pacific  Oper-
ating and Maintenance instructions.

This warranty does not apply to certain wear parts and accessories of the machine such as electrical cords, carbon motor brushes, floor
brushes, belts, hoses, tools, squeegee blades, etc., nor does it apply to damage or failure caused by improper use, abuse or neglect.
Warranty credit or replacement of return parts including motors, pumps, etc., is subject to incoming inspection of those items.

To secure repair under this warranty, the following procedure should be taken:

1.  The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid.
If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center
or agent or for other instructions pertaining to your warranty difficulty.

2.  Upon compliance with the above warranty procedure, all warranted repairs will be completed at no additional charge or cost to the
user.

3.  Only Pacific or its authorized dealers and agents may make no charge warranty repairs on this product.  All others do so at their own
risk.

This warranty limits Pacific liability to the repair of the product and/or warranted parts replacement and does not include incidental or
consequential damages arising from the use of a Pacific machine whether defective or not.

BATTERY WARRANTY
In addition to the terms above, any original equipment Pacific Steamex Battery which becomes unserviceable under normal use
within a period of ninety (90) days from date of sale to the original user will be repaired or replaced with one of equal specifica-
tion at our option, F.O.B. any authorized Pacific Steamex Sales or Service Branch, with no charge to user, except transportation
costs.  After the expiration of the above ninety (90) day period, any battery which fails under normal use will be adjusted to the
original user with a new battery of equal specification on a twelve (12) month pro rata basis from the date of purchase.  Adjust-
ment will be determined using the then current list price, plus transportation costs.  Warranty is rendered null and void if battery is
not kept  filled to the proper level with DISTILLED WATER.

This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user.

10/01

885617

2259 Sheridan

Muskegon, Michigan  49442

Ph: (800) 968-1332  Fax: (231) 773-1642

w w w.nextwaveofclean.com

Summary of Contents for Floormaster 18B





















Reviews: