3
3
1
5
4
2
Show the
Speeds & Timer
Hour
Minute
Operating Instructions
16
www.2pacific.com
When approaching the hood while it is powered off, the clock will illuminate.
If neither the fan nor lights are turned on within 60 seconds, the clock will turn off.
The icons will not disappear until the fan and lights are turned off.
Press to power on or off the fan, lights and deflect panel.
The hood has a memory function to remember the last used settings for the fan and lights.
Lock Screen :
While the fan is off, press and hold the for 3 seconds, and all the icon will be dim, the dimming icon
means the control is lock.
The purpose of this function is to clean the control easily.
Press and hold the for another 3 seconds until the icon turn lighter indicates that the lock function is
on unlock the screen.
Press the to change lighting level from 2, 1, off.
Press to increase fan speed from off, 1, 2, 3, 4 .
If hood is Off and is pressed, fan will turn on Speed 1.
Press to decrease fan speed from 4, 3, 2, 1, off.
If fan is on Speed 1 and is pressed, fan will power Off.
When ACT is enabled, the fan speeds will be reduced as follows:
(1)390 CFM
(2)290 CFM
While the fan is on, press to enable the delay off timer, it provides the options for either 3 or 5 minutes,
press one time for 5 minutes, press again for 3 minutes, the delay off timer will automatically
operate after 3 seconds when the timer is selected.
The fan will change to speed 1, and the timer will begin counting down from 3 or 5 minutes. After the timer
reaches 00:00, the fan and lights will power off.
When delay off timer is operating, and are available.
PROXIMITY SENSOR
On/Off
1.
2.
Light
Fan down
4.
Delay off
3.
Speed Selection Button
Fan up
ACT Enabled Speed Selections
