23
MAINTENANCE
END OF SHIFT
PAD DRIVER AND BRUSH MAINTENANCE
This portion of maintenance is simple and quick, but key to keeping your S-20 performing at peak levels. Remove the pad driver or brush to
check for wear.
Depress position “A” for 1 second
then depress position “B”
For pad removal on the orbital unit,
simply pull off the pad
Cleaning tool released by auto on/
off feature
To remove the pad driver or brush from your disk unit, locate the automatic off switch on the lower control panel at the rear of the
machine. Depress position “A” for 1 second and then depress position “B”.
For the orbital unit, simply pull off the pad taking care to follow proper safety precautions as indicated on your chemical product label in
regards to coming in contact with solution.
Should the pad or brush show ample wear and have reached their replacement point, simply discard the pad or brush and replace it at the
beginning of your next shift. Brushes should be replaced when the bristle length reaches 3/4 in (19 mm).
Alternatively, if not worn out, you can extend the life of your pad driver, pad or brush by rinsing out any captured debris or sediment and then
hanging it to dry between shifts - a simple step that can lower your cost to clean.
1
2
3
This will “click-off” the pad driver or brush.
1
2
3
Summary of Contents for S-20
