DAILY MAINTENANCE
15
3. CLEANING THE SQUEEGEE
To have the best drying results, keep the squeegee clean. To clean the squeegee:
1.
Lift the squeegee with its lever.
2.
Remove the hose (1) from the squeegee assembly.
3.
Clean the inside of the squeegee thoroughly with water.
4.
Clean the squeegee blades with water.
5.
Check the squeegee blades for wear and if necessary, change them. Refer to the
“Weekly Maintenance” section.
6.
Reassemble.
Note:
This maintenance assures a longer life for the vacuum motor.
4. DISASSEMBLY OF THE ROTATING BRUSHES
1.
Lift the brush base with its lever.
2.
Turn the key to the OFF position and remove it from the switch.
3.
Unhook the splash guards on the brush base (for the disassembly of the splash
guards see “REPLACEMENT OF SPLASH GUARDS”).
4.
Rotate each brush until it comes off from the brush plate seat. The figure shows
the rotating direction for the disassembly of the right brush, the left one has to
be rotated inversely.
