background image

This operator’s book has important information for the use and safe operation of this machine.  Read this book carefully before starting the machine.  Keep this 

book and tell all operators to read the book.  If you do not follow the instructions, you can cause an injury or damage equipment, furniture or buildings.

For new books, please download your copy from our website www.pacificfloorcare.com or write to: 

               Pacific Floorcare

               2259 S. Sheridan Drive

               Muskegon, MI  49442-6252

Carefully inspect all components to ensure that there is no concealed freight damage.  If such damage is discovered, file a “CONCEALED DAMAGE REPORT” im

-

mediately with the delivering carrier. 

The contents of this manual are based on the latest product information available at the time of publication.  Pacific reserves the right to make changes or im

-

provements without notice.

Thank you for purchasing a Pacific Floorcare product.  Warranty registration will allow us to better serve you over the lifetime of the product.  For quick and 

easy registration,  go to:  www.pacificfloorcare.com/Register Product.

PLEASE READ THIS BOOK

Z210 TRACTION DRIVE 

AUTO SCRUBBER

PARTS & OPERATING MANUAL

Summary of Contents for Z210




































Reviews: