SAFETY INSTRUCTIONS
1)
You must have training in the operation of the machine before using it.
READ THE INSTRUCTION BOOK.
If you do not understand any instruction, ask your
supervisor.
2)
Make sure all labels, decals, warnings, cautions and instructions are fastened to the machine.
3)
Read the labels carefully on the machine. Do not cover them for any reason and replace them if damaged.
4)
Do not operate this machine unless it is completely assembled and inspect the machine carefully before operation.
5)
Pay close attention to other people and especially children while operating this machine.
6)
Be a careful driver and do not strike shelving or scaffolding, especially where there is a danger of falling objects.
7)
Machines can cause an explosion when operated near flammable materials and vapors. Do not use this machine with or near fuels, grain dust, solvents,
thinners, or other flammable materials.
8)
In case of fire, use a powder extinguisher. Do not use water.
9)
Do not use this machine as a means of transport.
10)
Do not use acid solutions that could damage the machine or flooring.
11)
Adjust your speed to the conditions of the floor.
12)
Do not turn the machine on an incline. Do not stop and leave the machine on a ramp or incline.
13)
During any maintenance operation disconnect the power supply from the machine.
14)
Lead acid batteries generate gases that can cause an explosion. Read the instruction manual supplied with the battery charger. Keep sparks and flames
away from batteries.
NO SMOKING
. Charge the batteries only in an area with good ventilation.
15)
Do not use a charger if the power cord is damaged or a charger that is not matched to the machine.
16)
Always wear eye protection and protective clothing when working near batteries. Remove all jewelry. Do not put tools or other metal across the battery
terminals, or on the top of the batteries.
17)
Maintenance and repairs must be performed by authorized Service Centers only.
18)
Keep the electrical parts of the machine dry. Do not wash the machine with direct water jets or high pressure, or with corrosive material. For storage, keep
the machine in a dry location.
19)
Water solutions or cleaning materials used with this type of machine can leave wet areas on the floor surface. These areas can cause a dangerous condition
for the operator or other persons. Always put
CAUTION
signs near the area you are cleaning.
20)
Do not reach under shrouds with fingers, hands, or toes when machine is running.
2
Summary of Contents for Z210T
Page 34: ...34 WIRING DIAGRAM DRAWING 10...
