Halogen and LED Lights.
With the grease filter removed, from inside the hood press the light fixture out of its
mounting bracket. Unplug the light from the wiring harness. Avoid direct contact
between the lense and your hands.
Replace the damaged lamp by reversing the steps. Snap in place.
Replace the bulbs as follows:
1. Lift up and remove the light fitting with a screwdriver or other suitable tool.
2. Remove the blown halogen bulb (if the fan has 4 bulbs = 10W, 2 bulbs = 20W).
Remember that the bulb can be hot!
3. Insert the new halogen bulb.
If you touch the halogen bulb with your bare hands this may reduce its service life.
Always use a glove or a cloth to avoid direct contact.
NB:
The light is only meant for use during cooking and not for illuminating the
surroundings for longer periods. If the light is used for longer periods, this will
considerably shorten the burn time of the bulbs.
Recycling
This appliance complies with European Community directive 2002/96/EC, Waste
Electrical and Electronic Equipment (WEEE). By ensuring that this product is recycled
responsibly, the user helps prevent possible negative impact on the environment.
NB:
Dispose of this product responsibly. Irresponsible disposal can result in negative
environmental impact or personal injury.'
Under no circumstances may this extractor fan be disposed of as household waste. It
must be taken to a recycling centre for electrical and electronic equipment.
This product must be disposed of in accordance with local legislation.
For more information on disposal, recycling and reuse of this product, contact your
local authority, your household waste collection service or the store where you
purchased the product
