manualshive.com logo in svg

PACiS GTW GTW/EN T/C40, Technical Manual

The PACiS GTW GTW/EN T/C40 Technical Manual is a comprehensive user guide for this advanced product. Gain in-depth knowledge and understanding of its features, functionalities, and troubleshooting procedures. Download the manual for free at 88.208.23.73:8080 to maximize the potential of your PACiS GTW GTW/EN T/C40.

Share
Download
background image

Safety & Handling 

 

GTW/EN SA/C40 

 

 

 

PACiS GTW gateway 

 

Page 5/8 

 

3. GUARANTIES 

The media on which you received Schneider Electric software are guaranted not to fail 
executing programing instructions, due to defects in materials and workmanship, for a period 
of 90 days from date of shipment, as evidenced by receipts or other documentation. 
Schneider Electric will, at its option, repair or replace software media that do net execute 
programming instructions if Schneider Electric receive notice of such defects during the 
guaranty period. Schneider Electric does not guaranty that the operation of the software shall 
be uninterrupted or error free. 

A Return Material Authorisation (RMA) number must be obtained from the factory and clearly 
marked on the package before any  equipment acceptance for guaranty work. 
Schneider Electric will pay the shipping costs of returning to the owner parts, which are 
covered by warranty. 

Schneider Electric believe that the information in this document is accurate. The document 
has been carefully reviewed for technical accuracy. In the event that technical or 
typographical errors exist, Schneider Electric reserves the right to make changes to 
subsequent editions of this document without prior notice to holders of this edition. The 
reader should consult Schneider Electric if errors are suspected. In no event shall 
Schneider Electric be liable for any damages arising out of or related to this document or the 
information contained in it. 

Expect as specified herein, Schneider Electric makes no guaranties, express or implied and 
specifically disclaims and guaranties of merchantability or fitness for a particular purpose. 

Customer's rights to recover damages caused by fault or negligence on the part 
Schneider Electric shall be limited to the amount therefore paid by the customer. 
Schneider Electric will not be liable for damages resulting from loss of data, profits, use of 
products or incidental or consequential damages even if advised of the possibility thereof. 

This limitation of the liability of Schneider Electric will apply regardless of the form of action, 
whether in contract or tort, including negligence. Any action against Schneider Electric must 
be brought within one year after the cause of action accrues. Schneider Electric shall not be 
liable for any delay in performance due to causes beyond its reasonable control. 

The warranty provided herein dues net cover damages, defects, malfunctions, or service 
failures caused by owner's failure to follow the Schneider Electric installation, operation, or 
maintenance instructions; owner's modification of the product; owner's abuse, misuse, or 
negligent acts; and power failure or surges, fire, flood, accident, actions of third parties, or 
other events outside reasonable control. 

Summary of Contents for GTW/EN T/C40











































































































































































































































































































Reviews:

No comments

Related manuals for GTW/EN T/C40

IXXAT CAN@net II Manual preview
CAN@net II
Brand: IXXAT Pages: 21
AudioCodes Mediant 600 Hardware Installation Manual preview
Mediant 600
Brand: AudioCodes Pages: 32
THOMSON SPEEDTOUCH 510V4 User Manual preview
SPEEDTOUCH 510V4
Brand: THOMSON Pages: 96
Telco Access 211N Installation Manual preview
Access 211N
Brand: Telco Pages: 4
OCS Gateway User Manual preview
Gateway
Brand: OCS Pages: 66
Black Box Optinet FE408005AA User Manual preview
Optinet FE408005AA
Brand: Black Box Pages: 159
IEI Technology ACT-08A-N270 User Manual preview
ACT-08A-N270
Brand: IEI Technology Pages: 150
Forum SENTRY Quick Start Manual preview
SENTRY
Brand: Forum Pages: 20
RTA 460DFMSC-NNA1 Product User Manual preview
460DFMSC-NNA1
Brand: RTA Pages: 66
Samsara IG41 Install Manual preview
IG41
Brand: Samsara Pages: 2
RTA 460BSPBS-N70PB Product User Manual preview
460BSPBS-N70PB
Brand: RTA Pages: 80
dresden elektronik ConBee II User Manual preview
ConBee II
Brand: dresden elektronik Pages: 14
Avaya G600 Installing Manual preview
G600
Brand: Avaya Pages: 274
ICC ETH-200 Manual preview
ETH-200
Brand: ICC Pages: 103
Raritan CommandCenter CC-SG User Manual preview
CommandCenter CC-SG
Brand: Raritan Pages: 58
Sophos Astaro 625 Operating Instructions Manual preview
Astaro 625
Brand: Sophos Pages: 12
Eaton XN-GW Series User Manual preview
XN-GW Series
Brand: Eaton Pages: 206
SSS Siedle AGW 671-0 Product Information preview
AGW 671-0
Brand: SSS Siedle Pages: 4

Brands by name

Popular brands

Load more brands