1 Power
Switch
Slide to power on or off the device.
2
External GPS antenna
connector (MMCX
type)
If your car has a heat reflective/thermal windscreen, you may need to use
an external antenna to get better GPS reception.
3
Battery charging LED
Indicates the status of battery.
4 Touch
screen
Read status and information on the screen. Tap the screen to enter
information
and navigate through the applications.
5
SD/MMC card slot
Insert an SD/MMC card to read maps, music, photos.
6 Volume
up/down
Adjust the volume.
7
Car holder slots
Use to position your device in the car holder kit.
8
USB / Power connector
Use the supplied USB cable to connect the Compasseo to your computer
and exchange files or charge the battery, or connect the supplied car
adapter cable
and plug the other end into the cigarette lighter to charge
the battery.
9 Earphone
Jack
Connect earphones.
10 Battery lock switch
Use this switch to cut all power to the device. Note that this also resets
the device’s memory. You will have to perform the first start process again
(calibrate screen, settings, acquire GPS connection, etc.).
11 Reset
button
Restart your device in case it stops responding or becomes unstable.
12 Speaker
Listen to route guidance instructions or enjoy your music.
To make the most of your Packard Bell Compasseo, download extra maps, get the latest firmware and
purchase accessories, make sure you visit the
Packard Bell Website
regularly on
www.packardbell.com
!
6
