13
4. Slightly lift main board and slide out left speaker assembly.
5. Disconnect right speaker from main board.
6. Remove the screw (1xG) and take away the right speaker assembly.
7. Remove the screw (1xB) from main board.
8. Remove the screws (2xO) from the VGA connector on the rear.
Fig. 24
The main board and speakers.
9. Take away the main board.
10. Partially remove the foil over the touchpad.
11. Disconnect the touchpad cable.
Fig. 25
The touch pad connector.
12. Remove the screws (3xB) and remove the heat plate.
13. Push out the touchpad assembly.
