Packard Bell EasyNote F5/F7 Disassembly Manual
Page 19
Removing the Main Board
To remove the Main Board, first remove the Battery (see
Removing the Battery
), remove the
Hard Disk Drive (see
Removing the Hard
Disk
Drive
), remove the CPU (see
Removing
the
CPU
), remove the Optical Drive (see
Removing the Optical Disk Drive
), remove the LCD
Module (see
Removing the LCD Module
), remove the Bottom cover (see
Removing the Bottom
Cover
), remove MDC Modem (see
Removing the MDC Modem
), remove Chipset Heat Sink
(see
Removing the Chipset Heat Sink
) then perform the following steps:
1. Remove the right hinge cover as shown in Fig. 25
Fig. 25 Removing the right hinge cover
2. Remove the Hex screws from the VGA Port as shown in Fig. 26
Fig. 26 VGA Port
A = M2.5x11.5
Silver
B = M2.5x4.5
Black
M2.5x10 Silver
Summary of Contents for EasyNote F5
Page 1: ...Disassembly Manual ...
