Packard Bell EasyNote L Disassembly Manual
9
5. Carefully lift the LCD module away from the unit.
Removing the LCD Panel
To remove the LCD panel, first remove the LCD module (see
Removing the LCD Module
), then perform
the following steps:
1. Use a pin to remove the rubber covers on the LCD module.
Fig. 16
Location of rubber covers and screws.
2. After removing the rubber covers, remove the screws and release the LCD cover carefully.
3. Remove the inverter board after unscrewing the screw and disconnecting all connectors.
Fig. 17
Removing the inverter board.
4. Carefully lift the LCD panel.
5. Remove the screws on both sides of the LCD panel in order to release the LCD hinges.
Fig. 18
Removing the LCD panel hinges.
Removing the CPU
To remove the CPU first remove the battery (see
Removing the Battery
) and remove the keyboard (see
Removing the Keyboard
), then perform the following steps:
