77777
Packard Bell EasyNote ML Disassembly Manual
7
4.
Carefully remove the memory module from the socket.
Note:
In case two memory modules have been installed, you have to remove the top module first before you can
remove the one underneath.
Wireless LAN Adapter
To remove the wireless LAN adapter, first remove the battery (see
Battery
on page 4) and
then perform the following steps:
1. Remove the two screws securing the memory compartment cover (see
Fig. 4
on
page 6).
2. Take away the memory compartment cover.
3. Carefully disconnect the two wireless antenna cables.
4. Remove the two screws holding the wireless LAN adapter.
Fig. 8
Location of wireless antenna cable connectors and screws.
5. Take out the wireless LAN adapter from the socket.
Keyboard
To remove the keyboard, first remove the battery (see
Battery
on page 4) and then
perform the following steps:
1. Turn the notebook over so the top is facing up and open the LCD completely.
2. Release the keyboard by prying it up along the top side of the keyboard. There are
five tabs holding the keyboard in place on the front, particularly at the following
keys: <Esc>, <F5>, <F10>, <Pause> and <*>.
