77777
Packard Bell EasyNote ST Disassembly Manual
7
Note:
There are two WiFi antenna cables connected to the wireless LAN adapter. The black WiFi antenna cable is
connected to MAIN (1) connector and the white WiFi antenna cable is connected to AUX (2) connector.
4. Remove the screw securing the wireless LAN adapter; it will eject upwards (see
Fig. 6
on
page 6).
5. Take out the wireless LAN adapter from the socket.
TV Tuner (Optional)
To remove the optional TV tuner (mini PCI Express), first remove the battery (see
Battery
on page
4), and then perform the following steps:
1. Remove the two screws securing the memory compartment cover (see
Fig. 4
on page 5).
2. Lift the cover upwards from the left. There are two tabs holding the cover in place on the
right. Raise the cover until you can remove it from the casing (see
Fig. 4
on page 5).
3. Carefully disconnect the TV antenna cable.
Fig. 7 Location of antenna cable connector and screw.
4. Remove the screw securing the TV tuner (see
Fig. 7
on page 7); the card will eject
upwards.
5. Take out the TV tuner card from the socket.
Note:
The EasyNote ST has either a TV tuner card installed or the Intel Turbo memory, not both.
