4 -
Starting your computer
S
TARTING
YOUR
COMPUTER
Thank you for purchasing this Packard Bell computer!
This guide has been designed to introduce you to the features of your
computer and assist in your computing experience.
After setting up and starting your computer, as shown in the setup
instructions, it will ask you questions that will help you connect to the
Internet. Your computer will then configure installed software.
W
IRELESS
CONNECTION
To connect to a wireless network, first check the wireless features of your
computer are on, and that the router or modem you want to connect to is
also correctly configured.
• If wireless is not on, press the Windows key (
) + W, type "Wireless"
and then click on
Wireless
. Click the toggle switch under
Wi-Fi
to
enable the wireless connection. Click again to disable.
• To connect to a network, press the Windows key (
) + W, type
"Wireless" and then click on
Connect to a network
. Select your
network and enter the password if required.
• After a short delay, your computer should connect to the Internet.
If your network is not detected, or your computer does not connect to the
Internet, please refer to your ISP or router’s documentation. After your
computer starts and you can use it, open Internet Explorer and follow the
instructions.