24 -
EDR 2000 DVD Recorder User's Guide
4. Set the recording quality. In the Item Editor dialog box, use the Up/
Down arrow and SELECT buttons to select the quality value.
5. Setup the recording date. This setting is done with the third control
unit in Item Editor dialog box. Move the cursor, select the row, and
press the SELECT button to initiate the drop-down menu.
6. Press the TIMER button to exit the timer recording setup menu.
7. After setting up the timer recording schedule, configure the system
according to the schedule and make sure the system is in standby or
working status.
8. If the system is conducting another operation five minutes before the
schedule time, it will pop up an information box, prompting you
whether to start recording or not. If the recording condition is met,
highlight the OK button and press the SELECT button to confirm. If the information box is left attended,
the system will take it as a consent to record. After a while, it will start the recording according to the set
schedule.
9. If the system is in standby status, it will enter the recording mode automatically 2 minutes in advance
and start recording to the set schedule.
10. After completing the recording, the system will restore the status before the recording automatically.
Note: The system must be properly configured with the set values before completing expected recording jobs.
Select any timer recording item and press the ADD/CLEAR button to delete it. You cannot use finalized
DVD+R discs.
C
HAPTER
E
DITING
Introduction
For finalized discs, every title is made of only one chapter. There is no such function as selected chapter play
or random programmed play of disc segments for such discs. The index icon of each title is determined by
the system. As every title is made of only one chapter, it is inconvenient to browse the disc. The chapter
editing function is to solve such defect.
Enter the Chapter Editing Mode
When the disc in the drive is DVD+RW and the system is in the DVD Monitoring mode, press the EDIT
button to enter the Chapter Editing mode and the Chapter Editing control bar menu will appear.
Note: The Chapter Editing function is only available for DVD+RW discs.
EDR-2000-UG.book Page 24 Jeudi, 20. octobre 2005 8:32 08
