Figure 9 - Recording a Route
To playback your recording, select the data file, and tap the
Play
button.
Destinator ND
shows
the
Map
screen to play the recorded route. To stop the playback, return to the
Route Playback
screen and tap the
Stop
button.
You can tap the
Actions
button to display the following commands:
Delete Recording
This button lets you remove a selected recording.
Clear All Recordings
This button removes all recordings.
Playback Speed
Use the arrow keys to adjust the playback speed. The range is from
100% to 300%.
8.4 Pedestrian mode
The Pedestrian Mode button lets you toggle between traveling as a
pedestrian or in a vehicle. When in Pedestrian Mode, your navigation
region is limited to ten kilometers. When creating a pedestrian route,
Destinator avoids highways or other roads where pedestrians would not
travel. Voice prompts are not available in this mode.
Pedestrian Mode displays a shadow that shows the position of the sun.
This is helpful when you are trying to orient yourself to the Map screen
during the day. For example, you have calculated a route, but you don’t
know whether the route is to the right or left of your current position. If
you’re shadow is behind you, then the sun is in front of you. Move your
navigation device to the direction of the sun and follow the route. At
night, no shadow is displayed.
Note:
The sun is always in the opposite direction from where your shadow appears.
8.5 Map browsing
This feature lets you browse the map without the
GPS
receiver returning
you to your current location. Tap the
Browse the Map
button to
disconnect from the
GPS
receiver.
36