Charging the Battery
1.
Plug the Pocket PC into the cradle.
2.
You may need to connect the appropriate converter to the AC adapter’s plug
according to your country.
3.
Plug the AC adapter into the power connector on the USB cable.
4.
Plug the other end of the AC adapter into a grounded AC outlet.
A steady amber battery charging LED on the Pocket PC indicates that the
battery is charging.
Charging is completed when the LED goes off.
Whenever possible, keep your Pocket PC connected to the AC adapter and a power
source.This keeps the battery charged. If you want to unplug the AC adapter after the
battery has been fully charged, wait at least 5 seconds.This length of time is necessary for
the battery calibration to complete and thus ensure the best performance of the battery.
Should your Pocket PC indicate a low battery level just after it has been fully charged,
please repeat the battery calibration procedure.
Installing ActiveSync
With Microsoft
®
ActiveSync
™
installed on your desktop or notebook computer, you
can synchronise data between your Pocket PC and your computer. ActiveSync is
already installed on your Pocket PC. Install ActiveSync on your computer from the
Companion CD.
1.
Power on your computer and insert the Companion CD in the CD-ROM drive.
2.
In the “Getting Started with Your Pocket PC” screen, click on
Start Here
and
follow the ActiveSync Setup Wizard instructions.
A
– Pocket PC
B
– Cradle
C
– USB cable
D
– AC Adapter
E
– USB connector
F
– Computer
A
–
Battery Charging LED
B
– Pocket PC
C
– Cradle
D
– Power Connector
E
– AC Adapter
2
