LiveStudio
HARDWARE INSTALLATION
HEIGHT, ANGLE AND ORIENTATION ADJUSTMENTS:
01
02
Plug one end of the power cable
into the light and the other into
a power jack.
Turn on the power.
CABLE CONNECTION:
01
02
03
Loosen the wing knob on the light
stand joints and adjust the stand
height by raising and lowering the
sections of the stand to the desired
height.
Adjust the light angle by loosening
the wing knob on the side, as
pictured. Tilt the light to the
desired angle.
Adjust the horizontal orientation
of the light by loosening the screw
then rotate.
Note:
Re-tighten all
knobs and screw after adjustment.