INSTALLATION GUIDE
FHZL Series LED Hazardous Location Lighting
Instructions and specifi cations are subject to change at any time without notice. Copyright© 2021 PacLights All Rights Reserved
Page 4 of 5
Need help? (800) 988 -6386 Email: CS@PacLights.com Website: www.PacLights.com
PL_INST_FHZL_v0
FHZL POLE MOUNT (OPTIONAL)
The Optional Pole Mount can be used for all the FHZL fi xtures that
fi t directly onto the Trunnion Mount (Fig. 14). Round Poles (Ø2.4”
Max) will fi t the U-Bolts provided. The arm length of the Pole needs
to be the more than the length of the fi xture to clear the vertical
portion of the Pole.
1
FIG. 14
FHZL FIXTURE
TRUNNION MOUNT
NUTS
U-BOLT
Slide the FHZL fi xture with the U-Bolts and Nuts partially fastened
onto the Round Pole (Fig. 15).
2
Tighten the nuts to the U-Bolts and tighten the Wing Nut Screw
from the bottom of the Trunnion Mount to secure the Pole (Fig. 16).
3
FIG. 15
POLE
WING NUT
SCREW
FIG. 16
FHZL CHAIN MOUNT (OPTIONAL)
The Optional Chain Mount can be used for all the FHZL fi xtures.
The Chain Mount includes the two Chains, Carabiners at each end,
and Anchor Studs (Round Eye Nut Not Included) (Fig. 17).
1
FHZL FIXTURE
ROUND
EYE NUT
ANCHOR
STUD
CARABINER
CHAIN
FIG. 17
FIG. 18
HOLE
After the Anchor Studs are secured into the ceiling and the Chains
are hung from the Eye Nuts, at the other end of the Chain, the
Carabiners can be attached to the sides of the FHZL fi xture at the
top holes (Fig. 18).
2
CARABINER
U-BOLT
POLE
U-BOLT
FHZL FIXTURE
CEILING
FHZL FIXTURE
