12
Stopping Engine
•
To stop the engine in an emergency, release the clutch control lever, then turn the engine
switch to the OFF position.
1. Move the throttle lever to the SLOW position.
2. Let the engine idle for one or two minutes.
3. Turn the engine switch to OFF position.
4. Turn the fuel valve lever to the OFF position.
Operation (Using Hydraulic System)
•
Always make sure your surroundings is safety before dumping.
•
Never dump on a slope area. Machine can tip over.
•
Please do not dump bucket without load inside.
•
Raising bucket & scissors lifting
1. Move throttle lever to [ Fast / High ] position to raise engine speed.
2. Slowly push scissor handle up to raise the scissor & same as the bucket handle to
raise the dumper box.
3. Till the top, its stops. Then slowly pull down the handle tipping, scissor and dump box
lowers back to its original position.
Notes :
Move throttle lever to Low position (Low rpm) during bucket move down.
Service and Maintenance
Preventive Maintenance
•
Turn off engine and disengage all command levers. Engine must be cool.
Summary of Contents for MD 500-s
Page 1: ...MD 500 s...
Page 7: ...7 Machine Description...
