52
53
?
PACOJET 2 does not create overpressure during a processing cycle
The surface of the spray guard is not smooth. Since the spray guard also
provides a seal during of the processing cycle, the contact surfaces must be
clean and fully intact.
Inspect the spray guard for residue or damage. Clean if necessary.
If this does not alleviate the pressure inconsistency, contact an authorised
service provider.
?
The pacotizing blade can no longer be magnetically affixed securely to
the splined end of the machine shaft.
The pacotizing blade is held in place through a magnetic force at the end
of the machine shaft. Residue collection on the end of the machine shaft or
within the hollow end fitting of the pacotizing blade will weaken the magnetic
bond to the extent that the pacotizing blade cannot be affixed.
Clean the splined end of the machine shaft and the hollow end fitting of
the pacotizing blade.
Information
9
Technical Data PACOJET 2
9.1
nominal power consumption
950 W
Rate of rotation:
Motor:
6,000 rotations per minute
Pacotizing blade:
2,000 rotations per minute
Overpressure:
approx. 1.2 bar
Transmission:
Gear driven belt drive
Electronics:
Electronic controlled, microprocessor driven
Functions:
• Monitoring/display of processing cycle progress
• Precision shaft movement
• Rotation speed control, according to resistance
• Protective unit sensors
Dimensions :
498 mm × 182 mm × 360 mm (height × width × depth)
Sound emission:
79 dB(A)
Materials:
Exterior/Upper housing: stainless steel
Base:
coated cast aluminum
Frame/casing:
polyamide, 30% fibreglass reinforced
Protective outer beaker:
polyamide, 15% fibreglass reinforced
Rinsing insert:
nitrile rubber, food safe
Spray guard:
nitrile rubber, food safe
Sealing ring:
nitrile rubber, food safe
Beaker lids:
polypropylene, food safe
Pacotizing beaker:
stainless steel
Pacotizing blade:
cast steel
Shaft:
stainless steel
Blade holder:
stainless steel
Spatula:
stainless steel
Weight:
PACOJET 2
14.90 kg
Protective outer beaker
0.30 kg
Pacotizing beaker
0.35 kg
Beaker lids
0.01 kg
Spray guard
0.09 kg
Cleaning insert
0.13 kg
Sealing ring
0.03 kg
Rinsing insert
0.10 kg
Pacotizing blade
0.06 kg
Spatula
0.10 kg
Mains voltage variants: 230–240 V / 50–60 Hz
90–120 V / 50–60 Hz
