User’s Manual
14
Highlight
Show System Log…
and press the button to display the System Log.
The System Log screen lists system activities (up to 5,000
from the latest) that have occurred along with the time and
date. The icon will be displayed in the last column for
system activities of the remote site. You can scroll through
the log pages by using the Up and Down arrows, or you can
go directly to a log page by entering the log page number in
the box at the bottom left of the screen. Highlight
Close
and
press the button to exit the screen.
To export the system log information, connect the USB device to
the DVR. Highlight
Export…
and press the button. Highlight
the box beside
File name
and press the button. A virtual keyboard
allows you to enter the file name. Selecting
Export
will save the
log information in .txt file format on the USB device.
NOTE: When opening the saved .txt file, setting to the proper character encoding and using fixed width fonts
will be required to read the file properly.
The box beside
Recorded Data – From / To
displays the time information of recorded data.
Highlighting
Clear All Data…
and pressing the button will clear all video data. You will be asked to verify that
you wish to clear all data before the DVR erases the video data.
Clear All Data…
will not clear the System Log.
Date/Time
Highlight
Date/Time
in the System menu and press the button. The
Date/Time
setup screen appears.
Figure 10 — Date/Time setup screen.
Highlight the first box beside
Date
and press the button.
The individual sections of the date will highlight. Use the
Up
and
Down
arrow buttons to change the number. Use the
Left
and
Right
arrow buttons to move between month, date and
year. Once you have the correct date, press the button.
Highlight the Format box beside
Date
and press the button.
Select from the three available date formats and press the
button to save your selected format.
Highlight the first box beside
Time
and press the button.
The individual sections of the time will highlight. Use the
Up
and
Down
arrow buttons to change the number. Use the
Left
and
Right
arrow buttons to move between hour, minutes and
seconds. Once you have the correct time, press the button.
Highlight the Format box beside
Time
and press the button. Select from the three available time formats and press
the button to save your selected format.
NOTE: The clock will not start running until you have highlighted Save and pressed the
button.
Highlight the box beside
Time Zone
and press the button. Select your time zone from the list and press the button.
NOTE: The Time Zone can also be selected on the map below by pressing the Left and Right buttons or scrolling
the mouse wheel up and down.
Highlight
Use Daylight Saving Time
and press the button. Pressing the button toggles between
On
and
Off
.
Highlight the
Holiday
tab, and the Holiday setup screen appears.
Summary of Contents for 16-Channel
